AUTONET TV

Beginning to See the Light (Check Engine Light Diagnostics)

It's a light many drivers fear they'll see turn on at the most inopportune time.  It's the one on the dash that says "Check Engine," "Service Engine Soon," or it may be simply an engine-shaped light. Your first instinct may be to pull off to the side of the road and turn off the engine.

The truth is that Check Engine light can be pointing to problems as simple as a loose gas cap. But it could be as serious as a severely misfiring engine.  Don't ignore it because it's there to help you avoid an expensive repair it is designed to alert you to, to tell you something's not quite right.

Your vehicle has a connected system of computers and sensors constantly checking to see that all systems are working the way they should. If something isn't, the system will turn on the Check Engine light.

If it's flashing, that could be serious. Look at some of the other warning lights or gauges such as heat or oil pressure. They could be telling you your vehicle's problem should be checked right away. In that case, if you can, safely pull off the road and shut the vehicle down. If your vehicle loses power and the Check Engine light is on, try not to push the demands you are making on the engine, such as towing or accelerating hard.

Simply put, a flashing Check Engine light should be checked out by a professional as soon as possible.

If the Check Engine light is on steadily, manufacturers say it means there's a problem, but it probably doesn't require immediate service.  The system is designed to remember the problem it found and store it (as a code) so it can be retrieved later.

When you do bring your vehicle in to have us see what's behind the Check Engine light coming on, we’ll hook your vehicle up to a diagnostics tool that can reveal the clues the engine's computers have stored.  It takes a trained technician to understand those clues, like a doctor who can interpret a patient's symptoms and come up with the correct diagnosis. Some newer vehicles can even be checked remotely.

Once we figure out the problem and repair it, you'll be back on the road again. It's nice to know the Check Engine light is your sentry, standing by to alert you the next time you begin to "see the light."

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net

A Bright Idea

You've probably noticed how much easier it is to see when you're driving in the daytime as opposed to at night. It's one of the main reasons about half of all fatal vehicle accidents happen when it's dark.

That's why it's important that your vehicle's headlights are in top condition and working the way they should.  That means that they're aimed correctly and producing the amount of light they are intended to produce.

For many years, headlights were a standardized size and shape.  They were what is called a "sealed beam," and when you needed to replace one, it was pretty simple.  You just took the old one out and plugged a new one in. 

But now there are hundreds of different types of lighting systems on vehicles, producing light with such illuminating technology as light-emitting diodes (LEDs), halogen bulbs, high-intensity discharge (HID) bulbs and more.  Some vehicles have systems that turn your lights in the direction you turn your steering wheel so you can more clearly see where you are going.

Now that it's not so simple to change headlamps or bulbs, it's wise to consult your service advisor.  She or he can tell you what your options are.  There may be ways you can upgrade your lighting with new headlamps or components, but it's important not to install new parts that could damage your vehicle.  For example, the headlight housing could be damaged if a bulb burns too hot for its design. 

It's also good to check regulations and laws where you live.  Some regulate the color of light your headlamps can shine and how bright they can be. It's wise to leave it up to a technician to replace your headlamps.  Some are tricky to get at, and modern engine compartments can be packed so tightly, it's hard to maneuver around all of the other engine components to reach the headlamp compartment.

Oh, one other thing to keep in mind.  Even if your headlamps are both working, you might notice people are flashing their lights at you, even when you don't have the high beams on.  That could mean your headlamps are aimed wrong; for the safety of the other drivers and yourself, have your technician check your headlamps' aim.

You'll see the light when you have good visibility at night.

H20 No! (Driving Through Standing Water)

In a year marked by unusually heavy flooding in North America, drivers are very aware of the possibility they may find themselves driving where water has come over the road.  It can be a daunting and frightening situation.  Flooding waters can move quickly and unpredictably, so you have to keep your wits about you when you encounter that situation.

Here a sample of one vehicle manufacturer's guidelines on what to do.  First, the vehicle is designed to go through some water, but you must be careful.  Never attempt to drive through water deeper than the bottom of your tires.

You can get out of your vehicle to check the depth of the water, but you can never be sure that you aren't going to drive into a spot where the road has washed away.  You can't see below the surface of the water, and suddenly you could find yourself in a place where the road drops off unexpectedly.  In swift moving storm runoff, your vehicle could literally be floating away with the current, putting your life and those of your passengers in mortal danger. 

Never go more than 5mph/8 km/hr when you drive through standing water.  That minimizes the waves you create.  If you do find yourself in water that is touching your drivetrain components, that water can damage them.  And if you get water in your engine, it can lock up in seconds and stall.  The potential damage can be catastrophic.

You may have found yourself driving in water deep enough to reach your drivetrain components, and it's essential that you have a technician check the fluids to make sure they haven't been contaminated.  That includes engine oil, transmission and axle.  Driving with fluids contaminated with water can severely damage those components. 

The bottom line is to avoid driving through water at all if you possibly can.  Check your vehicle's owner's manual to see if there are specific guidelines for driving YOUR vehicle in standing water.  It's information that could save your life.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net

All Lined Up (Alignment Inspection)

When you head down a straight road, does your vehicle pull to one side?  Do you feel vibration in any of the wheels? If you've noticed any of these things, it's probably time for you to get your wheel alignment checked.

When your vehicle left the factory, its wheels were parallel to each other and perpendicular to the ground.  That maximizes traction for good steering and braking. Every time you take your vehicle on the road, normal wear and tear will affect your alignment. Hit a bump, a pothole or a curb and all those little knocks will add up

Bad alignment not only can cause your steering wheel to pull unevenly, it can also wear your tires out a lot faster than they should. In fact, if you look at your tires and see one side of the tread is a lot smoother than the other, it could be another sign of bad alignment.

Since different problems can cause similar symptoms, the first thing our trained technician will do is test drive your vehicle. Then, they'll check the front end and steering linkage as well as look for tire wear.  Then, the technician will put your vehicle on a lift and use computerized diagnostic equipment to measure alignment angles so they can precisely align your vehicle's components.

There are different kinds of alignments.  One is a front-end alignment that aligns components of the vehicle's front axle.  Another is a thrust alignment that makes sure the front wheels are lined up with the direction the rear wheels are pointed.  A third type is four-wheel alignment which is usually used on all-wheel drive and  4-wheel drive vehicles.  It's also recommended for front-wheel drive vehicles that have independent rear suspensions.  It makes sure the angles of all the wheels are where they should be relative to each other and also the vehicle's body or frame.

Your steering wheel should be perfectly centered if you are heading straight down the road, so the technician will adjust it so it is. Finally, they'll take your vehicle back on the road for a final test drive to make sure it's performing the way engineers intended.

Your service adviser can recommend how often you should have your alignment inspection, since it depends on the type of vehicle you drive (SUV, sporty car, etc.) and your driving environment.  Properly aligned wheels can help your vehicle perform better and save you from expensive repairs down the road.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net

Slippery When Wet (Driving on Wet Leaves)

When the leaves fall, you might take a sightseeing trip to see them at peak color.  Or you may simply live in a spot where there are a lot of trees.  When those leaves get wet, you'd be surprised to learn just how slippery they can be. 

We all know ice is slippery to drive on.  What causes tires to slip on ice is a thin layer of water that comes between the road and your tires.  Wet leaves can have the same effect.  The surfaces of leaves are super slick when they're dry, even worse when you add a little moisture.  There's one other thing about leaves.  They are smaller than each tire's footprint, so your tread grips the pavement with uneven traction.

One study showed that your stopping distance can more than double on a surface covered with wet leaves when compared to that same road when it's dry.  Double! That can spell trouble.  So if you find yourself heading into an area with wet leaves on the road, slow down before you get into a jam.  If you do start skidding, use the same driving techniques as you would on ice.  Let off the accelerator, resist jamming on the brakes and steer into the skid.  Again, speed can get you into trouble fast on a slippery surface.

One thing that can help is having tires that are appropriate for the way you drive and the places you travel.  Your service advisor can offer suggestions for tires that are right for you.  Have a technician examine your tread depth and the condition of your tires' rubber.  Sun can break down rubber over time, and age can cause tires to fail, even if their tread seems to be deep enough. 

Your tire is the point of traction between your vehicle and the road.  Uncontrolled skids spell trouble and danger.  Slow down when you see wet leaves on the road.  They can make traction disappear before you know it.

Niel's Auto Service
49 Taylor Ct Ste B
Thousand Oaks, CA 91360
805-379-4040
http://www.nielsautoservice.net